<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=1052797658146671&amp;ev=PageView&amp;noscript=1">
Skip to content
PHONE HOTLINE: 1300 610 059
Newsletter Hero
Georgina Mercer19 Nov 2026, 10:52:07 am19 min read

Australian WHS Round-Up: 1–17 November 2026

Australian WHS Round-Up: 1–17 November 2026
30:21

Australian WHS Round-Up: 1–17 November 2026

Welcome to Work Safety Hub’s Australian WHS Round-Up for 1 to 17 November 2026 inclusive. This edition summarises verified regulator, standards and workers compensation updates, with practical actions for WHS managers.

Information current as checked at 7:05 pm AEST (8:05 pm AEDT) on 18 November 2026.

Executive summary

  • National / All: Safe Work Australia announced a national strategy on climate-related WHS risks, updated 15 model Codes of Practice for workplace exposure limits and confirmed proposed quad bike reforms.
  • Commonwealth / Comcare: No qualifying Comcare update dated within the reporting period was found.
  • Australian Capital Territory: No qualifying WorkSafe ACT update dated within the reporting period was found.
  • New South Wales: SafeWork NSW reported serious incidents involving a falling trailer axle and contact with 11,000-volt power lines, while a statewide blitz issued 417 compliance notices.
  • Northern Territory: No qualifying NT WorkSafe update dated within the reporting period was found.
  • Queensland: Workplace Health and Safety Queensland updated guidance after a serious scaffold fall and issued an alert after a member of the public was injured by a falling tree. WorkCover Queensland had no qualifying dated update.
  • South Australia: SafeWork SA reported enforcement and prevention activity involving forklift risks, a precast wall collapse, hearing loss and enforceable undertakings. ReturnToWorkSA confirmed an independent scheme review.
  • Tasmania: No qualifying WorkSafe Tasmania update dated within the reporting period was found.
  • Victoria: WorkSafe Victoria reported two fatality prosecutions, four serious injury or collision matters and a safety alert about unintended movement of mobile plant underground.
  • Western Australia: WorkSafe WA issued a fatal wheelchair-lift incident summary, WA made workplace exposure limit regulations, and ABC News reported a separate mine-site death while the regulator investigated.
  • Standards: No monitored standard was newly changed or verifiably opened for public comment during the reporting period.

National / All jurisdictions

5 November 2026 — New national strategy to support safe work in a changing climate

Jurisdiction: National / All
Summary: Safe Work Australia announced the development of a national strategy on the WHS impacts of climate change. It will guide policy, regulation, research and workplace practice for hazards including heat, extreme weather, smoke, poor air quality, disease, ultraviolet radiation and changing chemical use.
Who it affects: All PCBUs, officers, WHS professionals and workers, especially those exposed to outdoor work, heat, emergency response, agriculture and climate-sensitive operations.
Recommended action: Add climate-related hazards to current risk reviews, identify vulnerable work groups and locations, and test heat, air-quality, emergency and business-continuity controls before seasonal conditions worsen.
Source: Safe Work Australia — New national strategy to support safe work in a changing climate
https://www.safeworkaustralia.gov.au/media-centre/media-release/new-national-strategy-support-safe-work-changing-climate

12 November 2026 — Model Codes of Practice updated to support the transition to workplace exposure limits

Jurisdiction: National / All
Summary: Safe Work Australia updated 15 model Codes of Practice to reflect the transition from workplace exposure standards to workplace exposure limits and added links to new air-monitoring guidance. Most revised limits commence on 1 December 2026, subject to jurisdiction-specific arrangements.
Who it affects: Workplaces with airborne contaminants, including construction, manufacturing, health care, chemicals, asbestos, silica, welding, spray painting and excavation.
Recommended action: Review chemical inventories, exposure assessments, monitoring and controls against the new limits, then confirm the legal commencement date and adopted code in each jurisdiction where your organisation operates.
Source: Safe Work Australia — Model Codes of Practice updated to support the transition to workplace exposure limits
https://www.safeworkaustralia.gov.au/media-centre/news/model-codes-practice-updated-support-transition-workplace-exposure-limits

URGENT — 17 November 2026 — WHS ministers agree to strengthen quad bike safety at work

Jurisdiction: National / All
Summary: A majority of WHS ministers agreed to progress reforms that would require operator protection devices and helmets, restrict passengers on operator-only quad bikes and limit workplace use to people aged 16 and over. Safe Work Australia reported 17 quad bike fatalities in 2026 as at 5 November.
Who it affects: Agriculture, land management, tourism, local government and any workplace using quad bikes.
Recommended action: Do not wait for model-law amendments: fit suitable operator protection devices, require helmets, prohibit passengers on single-seat machines, restrict young riders and reassess whether a side-by-side vehicle is safer for the terrain and task.
Source: Safe Work Australia — WHS ministers agree to strengthen quad bike safety at work
https://www.safeworkaustralia.gov.au/media-centre/news/whs-ministers-agree-strengthen-quad-bike-safety-work

Commonwealth / Comcare

Comcare check

No qualifying Comcare news, alert or publication dated 1 to 17 November 2026 was found. The official Comcare news and events pages were checked at 7:05 pm AEST (8:05 pm AEDT) on 18 November 2026.

Source: Comcare — News
https://www.comcare.gov.au/about/news-events/news

Australian Capital Territory

WorkSafe ACT check

No qualifying WorkSafe ACT news, alert or publication dated 1 to 17 November 2026 was found. The official WorkSafe ACT news and safety-alert pages were checked at 7:05 pm AEST (8:05 pm AEDT) on 18 November 2026.

Source: WorkSafe ACT — News and media
https://www.worksafe.act.gov.au/about-worksafe-act/news-and-media

New South Wales

URGENT — 2 November 2026 — Trailer company fined $225,000 after worker injured by falling trailer axle

Jurisdiction: New South Wales
Summary: AAA Trailers Pty Ltd was convicted and fined after a 350-kilogram axle fell on a worker who was underneath a trailer, causing serious injuries. The company pleaded guilty to failing to comply with its duty to workers.
Who it affects: Transport, trailer manufacture and repair, heavy-vehicle workshops and workers who work beneath raised loads.
Recommended action: Eliminate work beneath unsupported components, use rated stands or engineered restraint systems and verify isolation, lifting and inspection steps before anyone enters the crush zone.
Source: SafeWork NSW — Trailer company fined $225,000 after worker injured by falling trailer axle
https://www.safework.nsw.gov.au/news/safework-media-releases/trailer-company-fined-%24225%2C000-after-worker-injured-by-falling-trailer-axle

URGENT — 13 November 2026 — Company fined $238,000 after worker suffers an electric shock

Jurisdiction: New South Wales
Summary: Civil 1 Pty Ltd was convicted and fined after a 16-metre steel reinforcement cage buckled and contacted two 11,000-volt overhead power lines while a worker guided it into a hole, causing an electric shock.
Who it affects: Construction, civil works, crane and lifting operations, reinforcement contractors and workplaces near overhead power lines.
Recommended action: Identify power-line approach distances during lift planning, isolate or de-energise where practicable, use a dedicated safety observer and redesign the lift so long conductive loads cannot enter the unsafe zone.
Source: SafeWork NSW — Company fined $238,000 after worker suffers an electric shock
https://www.safework.nsw.gov.au/news/safework-media-releases/company-fined-%24238%2C000-after-worker-suffers-an-electric-shock

16 November 2026 — SafeWork NSW completes statewide inspection blitz

Jurisdiction: New South Wales
Summary: Inspectors visited 597 workplaces and issued 417 compliance notices, nine penalty notices and 11 official cautions. Almost half the workplaces required regulatory action, with falls and unsafe mobile plant, machinery and vehicles the most common issues.
Who it affects: Construction, manufacturing, agriculture, transport, warehousing, health care, retail and other NSW businesses.
Recommended action: Run a focused field verification of fall controls and interactions between people, vehicles and machinery, and confirm that corrective actions are closed and supervised rather than left in documents.
Source: SafeWork NSW — SafeWork NSW completes statewide inspection blitz
https://www.safework.nsw.gov.au/news/safework-media-releases/safework-nsw-completes-statewide-inspection-blitz

Northern Territory

NT WorkSafe check

No qualifying NT WorkSafe news, alert or publication dated 1 to 17 November 2026 was found. The official NT WorkSafe media-release and safety-alert pages were checked at 7:05 pm AEST (8:05 pm AEDT) on 18 November 2026.

Source: NT WorkSafe — 2026 media releases
https://worksafe.nt.gov.au/forms-and-resources/news-and-events/media-releases/2026

Queensland

3 November 2026 — Member of the public injured by falling tree

Jurisdiction: Queensland
Summary: Workplace Health and Safety Queensland reported that a tree being felled at a residential property struck a passing vehicle and injured a member of the public. The alert emphasises exclusion zones, competent assessment and control of traffic and public access.
Who it affects: Arborists, landscapers, property managers, contractors, councils and anyone arranging tree-felling work near roads or public areas.
Recommended action: Have a competent person assess the tree and fall zone, establish and enforce an exclusion zone, coordinate traffic and pedestrian controls and stop work if the public cannot be kept clear.
Source: Workplace Health and Safety Queensland — Member of the public injured by falling tree
https://www.worksafe.qld.gov.au/news-and-events/alerts/incident-alerts/2026/member-of-the-public-injured-by-falling-tree

URGENT — 12 November 2026 — Aluminium scaffold graspers

Jurisdiction: Queensland
Summary: Workplace Health and Safety Queensland updated an alert after a worker fell 4.5 metres when a scaffold guardrail grasper detached. The guidance explains correct orientation, inspection and loading of graspers and notes that investigations are continuing.
Who it affects: Construction, scaffold designers, suppliers, installers, inspectors and workers using mobile aluminium scaffolds.
Recommended action: Inspect latches and springs, fit graspers on the working-platform side in accordance with manufacturer instructions, remove defective components and verify edge protection before each use.
Source: Workplace Health and Safety Queensland — Aluminium scaffold graspers
https://www.worksafe.qld.gov.au/news-and-events/alerts/workplace-health-and-safety-alerts/2026/aluminium-scaffold-graspers

WorkCover Queensland check

No qualifying WorkCover Queensland news or publication dated 1 to 17 November 2026 was found. The official WorkCover Queensland website was checked at 7:05 pm AEST (8:05 pm AEDT) on 18 November 2026.

Source: WorkCover Queensland — Home
https://www.workcoverqld.com.au/

South Australia

2 November 2026 — Employers urged to better protect workers’ hearing

Jurisdiction: South Australia
Summary: SafeWork SA launched a campaign urging employers to reduce workplace noise and prevent permanent hearing loss. The regulator highlighted the need to identify noise hazards, apply higher-order controls and provide hearing protection and audiometric testing where required.
Who it affects: Manufacturing, construction, agriculture, transport, entertainment and any workplace where workers are exposed to hazardous noise.
Recommended action: Review recent noise measurements, prioritise quieter plant, isolation and engineering controls, confirm correct hearing protection and check whether audiometric testing obligations are being met.
Source: SafeWork SA — Employers urged to better protect workers’ hearing
https://www.safework.sa.gov.au/news-and-alerts/news/news/2025new/employers-urged-to-better-protect-workers-hearing

URGENT — 4 November 2026 — Freight company charged after worker struck by forklift

Jurisdiction: South Australia
Summary: SafeWork SA charged a freight company after a worker sustained serious injuries when struck by a forklift. The matter reinforces the need to separate pedestrians and mobile plant and control loading-area movements.
Who it affects: Freight, transport, warehousing, logistics, forklift operators and workers in loading and despatch areas.
Recommended action: Install physical separation where practicable, define pedestrian crossings and one-way routes, control reversing and blind spots and verify that speed, visibility and supervision arrangements work during busy periods.
Source: SafeWork SA — Freight company charged after worker struck by forklift
https://www.safework.sa.gov.au/news-and-alerts/news/news/2025new/freight-company-charged-after-worker-struck-by-forklift

11 November 2026 — $12 million invested in EUs in SA

Jurisdiction: South Australia
Summary: SafeWork SA reported that more than $12 million has been committed to safety initiatives through enforceable undertakings. The projects include industry education, research, training and other measures intended to deliver benefits beyond the duty holder involved.
Who it affects: Officers, legal and WHS teams, industry associations and organisations considering or monitoring enforceable undertakings.
Recommended action: Review relevant publicly available undertaking projects for controls or training that can be adopted locally, and ensure any undertaking commitments in your organisation have owners, milestones and evidence of completion.
Source: SafeWork SA — $12 million invested in EUs in SA
https://www.safework.sa.gov.au/news-and-alerts/news/news/2025new/%2412-million-invested-in-eus-in-sa

URGENT — 16 November 2026 — Builder fined $150,000 after wall collapses onto neighbouring home

Jurisdiction: South Australia
Summary: A construction company was fined after a 30-tonne precast concrete wall collapsed onto a neighbouring home. The case highlights the need for engineered temporary stability and exclusion controls during erection and before permanent bracing is complete.
Who it affects: Construction, precast concrete, crane crews, temporary-works designers, principal contractors and neighbouring property occupants.
Recommended action: Verify engineered erection and bracing plans, inspect anchors and temporary supports, control wind and sequencing limits and maintain exclusion zones that protect workers and the public.
Source: SafeWork SA — Builder fined $150,000 after wall collapses onto neighbouring home
https://www.safework.sa.gov.au/news-and-alerts/news/news/2025new/builder-fined-%24150%2C000-after-wall-collapses-onto-neighbouring-home

10 November 2026 — Independent Review of the Return to Work scheme

Jurisdiction: South Australia / ReturnToWorkSA
Summary: ReturnToWorkSA confirmed that the South Australian Government announced an independent review of the Return to Work scheme and released terms of reference. ReturnToWorkSA will provide information and expertise while the review remains independent.
Who it affects: South Australian employers, workers, claims agents, self-insurers, service providers and return-to-work professionals.
Recommended action: Review the terms of reference, identify operational evidence that may be relevant and track consultation and proposed changes without assuming the review has already altered scheme obligations.
Source: ReturnToWorkSA — Independent Review of the Return to Work scheme
https://www.rtwsa.com/about-us/news-room/articles/independent-review-of-the-return-to-work-scheme

Tasmania

WorkSafe Tasmania check

No qualifying WorkSafe Tasmania news, alert or publication dated 1 to 17 November 2026 was found. The official WorkSafe Tasmania news, alerts and publications pages were checked at 7:05 pm AEST (8:05 pm AEDT) on 18 November 2026.

Source: WorkSafe Tasmania — News
https://www.worksafe.tas.gov.au/news

Victoria

URGENT — 2 November 2026 — Traffic management company charged after roadside fatality

Jurisdiction: Victoria
Summary: WorkSafe charged a traffic management company after a worker was struck by a passing truck and died while packing up road signs. The allegations concern the order in which signs were collected and workers crossing live traffic.
Who it affects: Road construction and maintenance, traffic management companies, principal contractors and workers who install or remove traffic-control devices.
Recommended action: Review sign-removal sequences so work follows the direction of travel, eliminate crossings of live lanes and verify speed controls, protection vehicles, communications and safe refuge arrangements.
Source: WorkSafe Victoria — Traffic management company charged after roadside fatality
https://www.worksafe.vic.gov.au/news/2026-11/traffic-management-company-charged-after-roadside-fatality

URGENT — 4 November 2026 — Fencing company charged after gate collapse

Jurisdiction: Victoria
Summary: WorkSafe charged a fencing company after a steel gate collapsed onto a member of the public and caused serious injury. Allegations include inadequate welding procedures, competency, supervision, inspection and testing.
Who it affects: Fencing, fabrication, welding, installers, property managers and businesses that design or procure large sliding gates.
Recommended action: Require documented weld procedures, competent and supervised welding, qualified inspection and testing, and commissioning checks for supports, stops, guides and foreseeable misuse.
Source: WorkSafe Victoria — Fencing company charged after gate collapse
https://www.worksafe.vic.gov.au/news/2026-11/fencing-company-charged-after-gate-collapse

URGENT — 13 November 2026 — Company fined after worker paralysed in tree-cutting fall

Jurisdiction: Victoria
Summary: A construction company was convicted and fined after a carpenter fell from a 3.7-metre ladder while cutting a tree branch and became paraplegic. WorkSafe said the task should have involved a qualified arborist or safer access, and a safe work method statement was required.
Who it affects: Construction, labour hire, arboriculture, site managers and anyone arranging tree work at height.
Recommended action: Use competent tree specialists, perform work from the ground or an elevated work platform where practicable, prepare and follow the required safe work method statement and prohibit chainsaw work from ladders.
Source: WorkSafe Victoria — Company fined after worker paralysed in tree-cutting fall
https://www.worksafe.vic.gov.au/news/2026-11/company-fined-after-worker-paralysed-tree-cutting-fall

13 November 2026 — Plastics manufacturer charged over forklift safety risk

Jurisdiction: Victoria
Summary: A plastics manufacturer was charged over an alleged failure to manage collisions between pedestrians and forklifts after a worker was allegedly struck in a shared area. WorkSafe identified walkways, barriers and self-closing gates as reasonably practicable controls.
Who it affects: Manufacturing, warehousing, logistics and any workplace where pedestrians share space with forklifts.
Recommended action: Install physical barriers and self-closing gates at crossing points, clearly mark routes and verify that layout, visibility, speed and supervision prevent uncontrolled interaction.
Source: WorkSafe Victoria — Plastics manufacturer charged over forklift safety risk
https://www.worksafe.vic.gov.au/news/2026-11/plastics-manufacturer-charged-over-forklift-safety-risk

URGENT — 16 November 2026 — Waste company charged over fatal gate crush

Jurisdiction: Victoria
Summary: WorkSafe charged a waste company after a 370-kilogram sliding gate ran beyond its supports and fatally crushed a truck driver. The regulator alleged previous near misses and failures to install a stop, replace the gate or lock it out.
Who it affects: Waste, transport, depots, property managers and workplaces with large sliding or powered gates.
Recommended action: Inspect gate stops, guides, supports and maintenance history, act on near misses immediately and lock and tag unsafe gates out of service until an engineered repair is verified.
Source: WorkSafe Victoria — Waste company charged over fatal gate crush
https://www.worksafe.vic.gov.au/news/2026-11/waste-company-charged-over-fatal-gate-crush

16 November 2026 — Parking powered mobile plant underground

Jurisdiction: Victoria
Summary: WorkSafe warned mine operators about unintended movement where powered mobile plant is inadequately parked underground. The alert calls for controls suited to gradients, equipment condition and the consequences of movement.
Who it affects: Mining, tunnelling, underground construction, mobile-plant operators and maintenance teams.
Recommended action: Verify parking-brake performance, chocking and designated parking areas, account for gradients and ground conditions and isolate defective plant until it is repaired and tested.
Source: WorkSafe Victoria — Parking powered mobile plant underground
https://www.worksafe.vic.gov.au/safety-alerts/parking-powered-mobile-plant-underground

URGENT — 17 November 2026 — $60,000 fine after worker crushed by one-tonne load

Jurisdiction: Victoria
Summary: A glass supplier was convicted and fined after a one-tonne pack of glass sheets fell from a crane attachment and seriously injured a worker. The crane could not position the attachment directly above the load, and training records were absent.
Who it affects: Glass handling, manufacturing, warehousing, crane operators, labour-hire workers and businesses moving heavy sheet materials.
Recommended action: Reconfigure layouts so lifting equipment can remain within design parameters, select purpose-fit attachments, train and verify operator competence and keep people clear of the load path and potential fall zone.
Source: WorkSafe Victoria — $60,000 fine after worker crushed by one-tonne load
https://www.worksafe.vic.gov.au/news/2026-11/60000-fine-after-worker-crushed-one-tonne-load

Western Australia

URGENT — 2 November 2026 — Significant Incident Summary No. 16: Fatal incident during operation of vehicle wheelchair lift

Jurisdiction: Western Australia
Summary: WorkSafe WA reported that a wheelchair user was fatally injured when moved backwards towards a vehicle lift platform that was at ground level instead of level with the vehicle floor. The wheelchair tipped and the passenger fell, sustaining fatal head injuries.
Who it affects: Passenger transport, disability services, aged care, vehicle operators and organisations using wheelchair-accessible vehicles.
Recommended action: Verify the platform is level with the vehicle floor before moving a passenger, use manufacturer-approved restraint and operating sequences, train drivers and inspect interlocks, controls and warning systems.
Source: WorkSafe WA — Significant Incident Summary No. 16
https://www.worksafe.wa.gov.au/system/files/documents/2026-11/WS_SIS_Fatal-incident-during-operation-of-vehicle-wheelchair-lift_0.pdf

URGENT — MEDIA REPORT — 9 November 2026 — Goldfields, Esperance, Midwest and Wheatbelt WA local news briefing, Monday, 11 November, 2026

Jurisdiction: Western Australia
Summary: ABC News reported that a 75-year-old contractor died following a workplace incident at Regis Resources’ Duketon South operation and that WorkSafe was investigating. No regulator item page for this incident was available at the time of checking.
Who it affects: Mining operators, contractors, camp and site managers, emergency-response teams and workers at remote operations.
Recommended action: Confirm contractor critical-risk controls, incident-notification and scene-preservation arrangements, share only verified facts and monitor WorkSafe for findings before drawing conclusions about cause.
Source: ABC News — Goldfields, Esperance, Midwest and Wheatbelt WA local news briefing, Monday, 11 November, 2026
https://www.abc.net.au/news/2026-11-09/goldfields-esperance-and-mid-west-wa-local-news-briefing/107362900

11 November 2026 — Work Health and Safety Legislation (Workplace Exposure Limits) Amendment Regulations 2026

Jurisdiction: Western Australia
Summary: Western Australia published amendment regulations to implement workplace exposure limits, with the substantive changes commencing on 1 December 2026. The changes apply across the general and mining WHS frameworks.
Who it affects: WA workplaces where workers may be exposed to dusts, fumes, gases, vapours or other airborne contaminants, including mining, construction, agriculture and manufacturing.
Recommended action: Compare current exposure assessments and monitoring against the new limits, update procedures and controls and complete worker consultation before 1 December 2026.
Source: Western Australian Legislation — Work Health and Safety Legislation (Workplace Exposure Limits) Amendment Regulations 2026
https://www.legislation.wa.gov.au/legislation/prod/filestore.nsf/FileURL/mrdoc_49966.pdf/%24FILE/Work%20Health%20and%20Safety%20Legislation%20%28Workplace%20Exposure%20Limits%29%20Amendment%20Regulations%202026%20-%20%5B00-00-00%5D.pdf?OpenElement=

Standards update

No changes detected this week.

The Standards Australia news archive, official catalogue status and public comment portal were checked at 7:05 pm AEST (8:05 pm AEDT) on 18 November 2026 for AS/NZS ISO 45001:2018; AS/NZS 4801:2001; AS 3745; the AS 2293 series; AS 2444; AS 1670.1; AS 1851; AS/NZS 3000, 3012 and 3760; AS 1657; AS/NZS 1891; AS 1576.1; AS 4576; AS/NZS 4024; AS 1418; AS 2550; AS 2865; AS/NZS IEC 60079; AS/NZS 1269 Parts 0–4; AS 1319; AS/NZS 1715, 1716, 2210 and 1337/1338; and AS 3788:2024. Open public-comment drafts were monitored but none could be verified as newly opened within 1 to 17 November 2026.

Sources: Standards Australia — Drafts Open for Public Comment
https://comment.standards.org.au/
Standards Australia — News and updates
https://www.standards.org.au/news

ABC News / AAP media check

One ABC News item was included and is clearly labelled as a media report because WorkSafe WA had confirmed an investigation but had not published a direct incident item at the time of checking. No AAP-only item was included.

What WHS managers should do now

  • Complete the final workplace exposure limit gap review before 1 December, using the adopted requirements and dates in each jurisdiction.
  • Verify physical separation between people and forklifts, road traffic and mobile plant, including during non-routine and pack-up work.
  • Inspect gates, lifting attachments, scaffolds, temporary supports and vehicle wheelchair lifts for single-point failures and uncontrolled movement.
  • Prohibit work beneath unsupported loads and strengthen isolation, engineered restraint and exclusion-zone controls.
  • Review work near overhead power lines and long conductive loads, with de-energisation or a dedicated safety observer where required.
  • Add current climate-related hazards to operational risk reviews and prepare for the proposed quad bike reforms now.

This round-up provides general information only. It does not replace legal advice or a review of the duties and requirements that apply to your organisation.

Compiled by: Work Safety Hub – Helping organisations build safer, stronger workplaces.

🔗 worksafetyhub.com.au

RELATED ARTICLES